 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Clock Oscillator PX-501 Features Reflow Process Compatible Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances Typical Applications Base Stations Test Equipment Synthesizers Previous Vectron Model Number Frequency Range Standard frequencies C1310 1 MHz - 700 MHz 10; 20; 24.705; 30.720; 32.768; 50; 68.768; 76.8; 77.76MHz; 100; 125; 150; 155.52; 156.25; 175; 200; 250; 280; 312.5MHz; 340; 400; 622,08 MHz Frequency stabilities1 [Standard] Parameter vs. operating temperature range (Referenced to +25C) Min -10.0 Typ Max +10.0 Units ppm Operating temperature range -20 ... +70C Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging vs. aging /1. Year Min -5.0 -1.0 -1.0 -3.0 -1.0 Typ Max +5.0 +1.0 +1.0 +3.0 +1.0 Units ppm ppm ppm ppm ppm Operating temperature range VS 5% Load 5% / year (followingYears) htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 PX-501 page: 1/7 Frequency stabilities1 [meets SONET Minimum Clock Specification-Option] Parameter vs. operating temperature range Min Min -20.0 Typ Typ Max Max +20.0 Units Units ppm Operating temperature range -20 ... +70C Parameter overall tolerance Conditions ( 15 Years aging, temp, initial, supply, load ) Supply Voltage (Vs) Parameter Supply voltage (Vs) Current consumption Current consumption Supply voltage (Vs) Current consumption Current consumption Current consumption 3.135 3.3 Min 4.75 Typ 5.0 Max 5.25 40 90 3.465 30 80 25 Units VDC mA mA VDC mA mA mA Condition @ HCMOS < 155 MHz @ PECL < 155 MHz @ LVHCMOS< 155 MHz @ LVPECL< 155 MHz @ LVDS< 155 MHz RF Output Parameter Signal Load Rise and Fall Time Duty cycle Signal Load Rise and Fall Time Duty cycle Signal Load Rise and Fall time Duty cycle Signal Load Output Power -3 50 0 3 40 Sinewave dBm 100 1 60 45 LVDS ns % 10 to 90 % 50 1 55 40 PECL ns % Vs-2V 20-80% 15.0 5 60 Min Typ HCMOS Max Units pF ns % Condition @15 pF 10 to 90% @Vs/2 Additional Parameters Parameter Phase Noise Min Typ -85 -120 -145 -155 -160 Max Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 100 1 10 100 Condition Hz Hz kHz kHz kHz @ 12 kHz to 20 MHz @49,408 MHz HCMOS 3,3V Jitter 0,2 htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 PX-501 page: 2/7 Additional Parameters Parameter Phase Noise Min Typ -80 -115 -135 -141 -141 Max Uniits dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 100 1 10 100 Condition Hz Hz kHz kHz kHz @ 12 kHz to 20 MHz @125 MHz PECL 3,3V Jitter 0,6 Parameter Phase Noise Min Typ -62 -93 -124 -142 -143 Max Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 100 1 10 100 Condition Hz Hz kHz kHz kHz @ 12 kHz to 20 MHz @400 MHz PECL 3,3V Jitter Weight Processing & Packing 0,2 2 handling & processing note g Absolute Maximum Ratings Parameter Supply voltage (Vs) Operable temperature range Storage temperature range -30 -40 Min Typ Max. 7 +80 +90 Units V C C Condition htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 PX-501 page: 3/7 Enclosure Type G223 "A" for HCMOS and LVHCMOS Version Options5 Height "H" 5,9 Pin Length "L" NA Type G218 "B" for HCMOS; PECL; LVPECL and LVDS Version Height "H" 5,9 Pin Length "L" NA Options5 Pin 5 No Data compl. Data compl. Data Dimensions: mm Dimensions: mm Pin Connections 1 NC / Enable (optional) 2 Ground (Case) 3 RF Output 4 Supply Voltage Input (Vs) 1 N/C Pin Connections 2 N/C / Enable (optional) 3 Ground (Case) 4 RF Output 5 Complementary RF Output / (N/C: HCMOS only) 6 Supply Voltage Input (Vs) Outline Drawing: G223B Enable true table Pin 2 High Open Low Outline Drawing: G218B HCMOS Pin 4 Data Data High Tristate Pin 5 N/C N/C N/C LVPECL / LVDS Pin 4 No Data Data Data Marking PX-501 Frequency AYYWW htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 PX-501 page: 4/7 Typical Phase Noise and Jitter 49,408 MHz; HCMOS output 125 MHz; PECL output Frequency range [Hz] 12kHz to 20MHz Jitter [ps rms] 0.188ps Frequency range [Hz] 12kHz to 20MHz Jitter [ps rms] 0.608ps (400 MHz; PECL output) Typical frequency stability vs temperature Frequency range [Hz] 12kHz to 20MHz Jitter [ps rms] 0.140ps 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Notes: htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 PX-501 page: 5/7 Standard Shipping Methode Lage im Gurt Position in tape Pin 1 A X B P *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Abwickelrichtung Unwinding direction K Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Production tolerance complying DIN IEC 286-3 Enclosure Type G218B / G223B Tape width W [mm] 24 Quantity per meter 83,3 Quantity per reel 850 Dimension P 12 Recommanded Reflow Profile Profile Feature Average ramp-up rate (TL to Tp) Preheat -Temperature Min Tsmin -Temperature Min Tsmax -Time (min to max) (ts) Pb-Free Assembly/ Sn-Pb Assembly 3C/second max. 150C 200C 60-180 seconds 3C/second max 217C 60-150 seconds max 260C Profile Feature Time 25C to Peak Temperature Time maintainted above -Temperature (TL) -Time (tL) Pb-Free Assembly/ Sn-Pb Assembly 8 minutes max. 217C 60-150 seconds TSmax to TL-Ramp-up Rate Time maintainted above -Temperature (TL) -Time (tL) Peak Temperature (TP) Time within 5C of actual Peak Temperature (tP) Ramp-down Rate 20-40 seconds 6C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow process. htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 PX-501 page: 6/7 How to order this product: Use this worksheet to forward the following information to your factory representative: Model PX-501 Height 0 Supply Voltage Code E RF Output Code A Temperature Range J Stability 105 X X Frequency 10MHz Height: 0: A 5,9 mm 1: B 5,9 Supply Voltage Code: E: D: 3,3 V 5V RF Output Code: A: HCMOS C: PECL D: LVDS E: Sinewave Temperature Range/Stability Code: J-105: -20...+70C 10ppm J-205: -20...+70C 20ppm over all htttp://www.vectron.com Vectron International*267 LowellRoad, Hudson, New Hampshire 03051*Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG * Landstrae, 74924 Neckarbischofsheim, Germany * Tel: +49 7268 801 100 PX-501 page: 7/7 |
Price & Availability of PX-5010-ECJ205
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |